After manual pre assembly, place the product on the product base in the correct direction. Press the start button with both hands, and the cam divider rotates to transport the motor to the tightening station. After detecting that the product is in place, the electric cylinder drives the torque motor to go down, and uses the socket screwdriver connected at the end of the torque motor to tighten the motor screws. At the same time, the displacement sensor feeds back the screw tightening height to the PLC in real time, judges the product status through the preset data, and informs the operator at the same time.
Main technical parameters:
Equipment size: 972 * 900 * 2000 (L * W * H)
Host weight: 1100kg
Total product length: 330.5mm
Rotor stack thickness: 25, 32, 40, 50mm
Torque range: 1.5N. m-2.5N. m
Working efficiency: ≤ 18s/piece
Input voltage: three-phase AC380V
Air pressure: 0.4~0.6Mpa
Functions and features:
Feedback torque and screw height to ensure reliable product quality.
Double start buttons and finger level safety gratings ensure the safety of operators;
PLC control, stable performance, self diagnosis alarm system, safe and reliable
High quality pneumatic components, electronic control components, reliable and stable performance.